Dashboard
What you will see from day one
This is what the dashboard looks like when the first Solo comes online.
Solo site dashboardOne Solo · October · modelled 12:00 pm AWST
Sample data · modelled daySolar
4.3kW
1,008 W/m²
of 25.0 kW available
Wind
1.8kW
5.8 m/s
Battery
0.0kW
Diesel
0.0kW
Genset off
Output to site
6.1kW
Solar used + Wind + Diesel ± Battery
Diesel avoided today
14.3litres not burned
From 53.0 kWh delivered to the site since midnight
Renewable share
Real time
24 hour average
Future: diesel offset credit
Future feature, not yet availableThe same meter data could later count the diesel your site did not burn as tonnes of CO₂e avoided, ready for an eligible offset or credit method if and when one applies.
Sample figures for one Solo in October at peak output. Not live readings. Solar: 31 kWp bifacial, shown at its 25 kW peak. Wind: one Freen-20 (20 kW rated), shown near its rating. Sample day: about 740 kWh served. Battery: 125 kWh. Solar not needed once the battery is full is held back, so the Solar tile shows what is used, out of what is available. Output = solar used + wind + diesel ± battery. Diesel avoided = load served × 0.27 litres per kWh (typical genset rate). CO₂ uses 2.68 kg per litre. Fuel cost saved uses an assumed $2.00 per litre delivered to site; your price will differ. Monthly and yearly totals repeat this sample day. Credit eligibility, method, and value are not yet determined.
Every source, at a glance
Solar, wind, battery, and any diesel, flowing into one output figure for the site. The AI uses the same data to dispatch the power.
Diesel you did not burn
Litres avoided, CO₂ avoided, and fuel cost saved, counted from the renewable power the Solo delivers.
